One check for your whole call setup
Most call problems come down to two devices: the camera and the microphone. This page opens both with one permission prompt and checks them side by side. On the left you see your live picture. On the right you get the resolution the camera really delivers, its frame rate counted from real frames, and a microphone level meter in dBFS that moves when you talk.
The summary under the meter tells you in plain words whether each device works. If one of them fails, the message says which one and why, for example a blocked permission, a device that is not plugged in, or a camera that another app is holding.
Record a clip and play it back
The live preview shows that the camera works, but not how you come across. Press Record 5 s clip, talk for a few seconds, and the clip plays back right away with picture and sound together. Listen for a voice that is too quiet, muffled, echoing or noisy, and look for a dark or grainy picture. The clip is made in your browser and stays on this device; it is only saved as a file if you press Download.
The preview is mirrored by default, like a bathroom mirror, because that feels natural. The recorded clip is not mirrored, so it shows what other people see.
Before a Zoom, Teams or Meet call
- Pick the same devices in the app. If this page works but the call does not, the app is probably set to a different camera or microphone. Laptops with a headset plugged in often have two of each.
- Close other apps that use the camera. On Windows, only one app can usually use a webcam at a time.
- Light in front of you. A window behind you turns your face dark and can lower the frame rate.
- Watch the meter while you talk. Normal speech should move it well into the green; peaks that hit the red end and light CLIP will sound distorted.
What the numbers mean
Resolution is the size of the frames the camera actually sends, which can be lower than the box promises. Frame rate is counted from real frames once per second when the browser allows it; otherwise it shows the rate the camera reports, marked Reported. Mic level is in dBFS, decibels below the loudest signal the mic can record, so 0 is the maximum and normal speech usually sits somewhere between -30 and -10. It does not measure how loud the room is.
Go deeper
For supported resolutions, a 10 second frame rate average, a light check and snapshots, use the webcam test. For noise floor, clipping counts, mains hum and Bluetooth headset checks, use the mic test. To check your speakers or headphones, try the sound test.
Questions
How do I test my camera and microphone at the same time?
Press "Start camera and mic" and allow both when your browser asks. You see your live picture with its real resolution and frame rate, and a level meter that moves when you talk. Then record a 5 second clip and play it back to see and hear yourself the way others do on a call.
How do I check my webcam and mic before a Zoom, Teams or Meet call?
Run this test first: if the picture and the meter work here, the hardware and the browser are fine. Then pick the same camera and microphone in the call app. In Zoom use Settings, Video and Audio, or a test meeting at zoom.us/test. In Teams use Settings, Devices, or the test call. In Google Meet, open the green room before you join, or Settings, Audio and Video.
Why does my camera work but my mic does not (or the other way round)?
They are separate devices with separate permissions. Check the microphone or camera icon in the address bar, the privacy settings of your system (Windows Settings, Privacy and security, or macOS System Settings, Privacy and Security), and a mute switch or key on the device or headset. This page tells you which of the two failed.
How do I test if my webcam microphone is working?
Many webcams have a microphone built in. Press Start, open the Microphone menu and pick the entry named after your webcam, then talk: if the level meter moves, the webcam microphone is working. Record the 5 second clip to hear how it sounds, since built-in webcam mics often pick up more room echo than a headset, which makes this quick cam and mic test worth doing before a call.
Is this camera and mic test private?
Yes. The picture and sound are shown only in this page and never uploaded. The 5 second clip is made in your browser and stays on this device unless you press Download. Everything turns off when you press Stop, switch tabs or leave the page.
Why can I not hear myself while the test runs?
On purpose. Playing your mic live through the speakers causes echo and feedback. Record the 5 second clip instead and play it back, preferably with headphones.
Why is the frame rate low?
Low light is the usual reason: the camera exposes each frame for longer, so 30 fps can drop to 15. Add light in front of you. Other apps using the camera, USB hubs and long cables can also lower it. The webcam test has a full resolution and frame rate check.
The meter moves but the clip is silent. Why?
Make sure your speakers or headphones are on and the clip is not muted in its player. If the meter only moves a little, the mic input level in your system settings may be very low, or the wrong microphone is selected in the Microphone menu.
More tests
Webcam testResolution, real frame rate and a snapshot
Online mirrorYour camera as a mirror, with a true mirror view, zoom and a ring light
Mouse testCheck every button, side buttons and the scroll wheel
Keyboard testPress every key, with ISO, AZERTY and QWERTZ layouts
Controller testButtons, sticks, triggers and vibration for any gamepad
Online compassDigital compass on your phone, with true north for your location