EN
TestYourSetup / Aim and sensitivity / eDPI calculator

eDPI calculator for Valorant, CS2 and other games: DPI x sensitivity

Type your mouse DPI and in-game sensitivity to get your eDPI. Pick your game to also see how far your mouse moves for a full turn, and the same feel in other games.

Not sure your mouse really runs at the DPI on the box? Measure your real DPI first.

More options: change DPI, keep the same feel

 

Type your mouse DPI and in-game sensitivity to see your eDPI.

Everything is calculated in your browser. Nothing is uploaded; your numbers only go into the address if you copy a share link.

An eDPI calculator multiplies your mouse DPI by your in-game sensitivity. The result, eDPI (effective DPI), is the number players use to compare aim speed within one game: 800 DPI at 0.35 and 400 DPI at 0.7 are both 280 eDPI in Valorant and feel exactly the same. eDPI has one catch that most calculators skip: it means nothing across games, because Valorant, CS2, Overwatch 2 and Fortnite each turn by a different angle per mouse count. So this calculator also turns your eDPI into cm/360, the real distance your hand moves for one full turn, places it on a rough scale from very fast to slow, and shows the sensitivity that gives the same feel in other games. The turn rates come from the same sourced table as our sens converter, and you can check the DPI you type with the mouse DPI test.

What is eDPI?

DPI (dots per inch, also called CPI) is how many counts your mouse sends to the PC per inch of movement. In-game sensitivity is a multiplier the game applies to those counts. Neither number alone tells you how fast you aim: 1600 DPI with a low sensitivity can be slower than 400 DPI with a high one. eDPI combines the two into one number, so two players of the same game can compare settings at a glance. Higher eDPI means a faster sensitivity: less hand movement for the same turn.

How do you calculate eDPI?

The formula is one multiplication: eDPI = DPI x in-game sensitivity. To go further and get the turning distance, the calculator uses each game's turn rate, the degrees the view turns per mouse count at sensitivity 1: cm/360 = 360 / (turn rate x eDPI) x 2.54.

Worked example: 800 DPI, Valorant sensitivity 0.35

  • eDPI = 800 x 0.35 = 280.
  • Valorant turns 0.07 degrees per count at sensitivity 1, so one count at 0.35 turns 0.0245 degrees. A full turn takes 360 / 0.0245, about 14,694 counts, which is 18.4 inches of movement at 800 DPI: 46.7 cm/360, a medium sensitivity.
  • The same feel in CS2 at 800 DPI is a sensitivity of 1.1136 (eDPI 891), and in Overwatch 2 3.712 (eDPI 2,970). Three different eDPI numbers, one identical aim speed.
  • Switching to 1600 DPI? Halve the sensitivity to 0.175 to keep eDPI 280.

How to use the eDPI calculator: step by step

Step 1: Find your mouse DPI

Look in your mouse software (Logitech G HUB, Razer Synapse, SteelSeries GG and others) or the DPI button on the mouse. If you have never checked, measure it with the mouse DPI test: sensors often run a few percent away from the number on the box.

Step 2: Find your in-game sensitivity

Open the game's mouse or controls settings and copy the sensitivity number exactly, including decimals. In CS2 you can also type sensitivity in the console to see it.

Step 3: Pick your game and type both numbers

The calculator multiplies them for your eDPI. With a game picked, it also gives your cm/360, the distance your mouse travels for one full turn, and where that sits on a rough scale.

Step 4: Compare with other games or a new DPI

Open Same feel in other games for the sensitivity that matches your aim in Valorant, CS2, Apex and more. Under More options, type a new DPI to get the sensitivity that keeps the same eDPI.

Why eDPI cannot be compared between games

Each game turns the camera by its own angle per mouse count. The chart shows the eDPI that gives the same 40 cm/360, a medium speed, in each game. The bars are very different lengths for exactly the same feel, so a "good eDPI" only means something next to the name of a game.

eDPI that gives 40 cm per 360 degree turn in eight gamesValorant327Counter-Strike 21,039Apex Legends1,039Marvel Rivals1,306Overwatch 23,464Call of Duty (Black Ops 7, Warzone)3,464Rainbow Six Siege3,990Fortnite4,115eDPI (DPI x in-game sensitivity) for 40 cm per full turn
Calculated from the hip fire turn rates in our sens converter table (checked 2026-10-15). Fortnite uses its percentage as shown in the game. Approximate turn rate: Marvel Rivals.

That is why our sens converter and this calculator work through cm/360: it is the one number that means the same in every game.

What is a good eDPI?

The good eDPI is the one you aim best with. As a starting point, the table turns the rough cm/360 bands from our cm/360 calculator into eDPI for each game. The bands are a rough guide from common player settings, not measured statistics.

GameVery fast (under 20 cm)Fast (20 to 35 cm)Medium (35 to 55 cm)Slow (over 55 cm)
Valorantover 653373 to 653238 to 373under 238
Counter-Strike 2over 2,0781,188 to 2,078756 to 1,188under 756
Apex Legendsover 2,0781,188 to 2,078756 to 1,188under 756
Overwatch 2over 6,9273,958 to 6,9272,519 to 3,958under 2,519
Call of Duty (Black Ops 7, Warzone)over 6,9273,958 to 6,9272,519 to 3,958under 2,519
Fortniteover 8,2304,703 to 8,2302,993 to 4,703under 2,993
Rainbow Six Siegeover 7,9804,560 to 7,9802,902 to 4,560under 2,902
Marvel Rivalsover 2,6131,493 to 2,613950 to 1,493under 950

Tactical shooters with one-shot headshots, such as Valorant, CS2 and Rainbow Six Siege, reward precise small movements, and many players there use medium or slow settings. Games with fast tracking and movement, such as Apex Legends, Overwatch 2 and Fortnite, often push players toward faster settings. A practical test: you should be able to turn 180 degrees in one comfortable arm movement and still stop on a small target. Try two settings 15% apart in the aim trainer, which runs at your real cm/360, and keep the one where you hit more.

Valorant eDPI

Valorant eDPI is DPI x the Sensitivity value under Settings, General, Mouse. Valorant turns 0.07 degrees per count at sensitivity 1, so its eDPI numbers are small: a medium speed of 35 to 55 cm per turn is about 238 to 373 eDPI. The scoped sensitivity multiplier is separate and is not part of eDPI. Coming from CS2, divide your CS2 eDPI by about 3.18 for the same feel.

CS2 eDPI

CS2 eDPI is DPI x the sensitivity setting (or the sensitivity console value). CS2 turns 0.022 degrees per count at sensitivity 1, the classic Source engine value, so a medium 35 to 55 cm per turn is about 756 to 1,188 eDPI. If you changed m_yaw for stretched 4:3, horizontal eDPI is no longer comparable with other CS2 players. Apex Legends uses the same 0.022 turn rate, so CS2 and Apex eDPI carry over one to one.

Overwatch 2, Fortnite and Rainbow Six Siege eDPI

Overwatch 2

Overwatch 2 turns 0.0066 degrees per count per sensitivity point, so its eDPI numbers are large: medium is about 2,519 to 3,958. Call of Duty uses the same turn rate, so Overwatch 2 and Call of Duty eDPI match.

Fortnite

Fortnite shows sensitivity as a percentage (X-axis sensitivity). Multiplying DPI by the percentage as shown gives medium at about 2,993 to 4,703. Some sites write the percentage as a decimal first (7% as 0.07), which gives numbers 100 times smaller. Both describe the same speed, so check which way a list is written before you compare.

Rainbow Six Siege

Siege multiplies its whole-number slider by a value in GameSettings.ini (0.02 unless you edited it). With the default, medium is about 2,902 to 4,560 eDPI. If you changed that file value, eDPI is not comparable with players who did not.

eDPI vs cm/360

eDPI is quick and common within one game's community. cm/360 is a physical distance: centimetres of mouse movement for one full turn. It does the same job across every game, and it tells you how much desk space you need: at 46 cm/360 a 180 degree turn takes 23 cm of mouse movement, more than many small mouse pads allow in one swipe. Use eDPI to talk settings with other players of your game, and cm/360 when you switch games or buy a mouse pad.

How to keep the same eDPI with a new DPI

New sensitivity = old DPI x old sensitivity / new DPI. Going from 800 DPI at 0.35 to 1600 DPI, the new sensitivity is 0.175, and the eDPI stays 280. The calculator does this under More options, rounded to what the game accepts. Some games only take two decimals, so the eDPI can move by a fraction of a percent after rounding.

How to find your eDPI if you do not know your DPI

Mouse software shows the DPI steps your mouse is set to, and many mice have a light or an on-screen notice when you press the DPI button. Without software, use the mouse DPI test: move the mouse a known distance against a ruler or a bank card and the page measures the counts. That measured number is also more accurate than the box, since sensors often run a few percent off.

Why we built this eDPI calculator

eDPI is the number players swap when they compare settings, and working it out is one multiplication. The trouble starts after that: people copy a pro's eDPI from another game, or compare their Valorant eDPI with a friend's CS2 eDPI, and the same number means a different speed in each game. Nitin Raja, who builds this site, tried a lot of eDPI calculators before building this one: many stop at the multiplication and never show cm/360, the one number that carries across games. Some of the sensitivity tools that do convert between games keep most games behind a subscription.

So this calculator keeps the multiplication up front and adds what people need next: the real turning distance in your game, a rough idea of how fast that is, and the same feel in other games, all from a free turn rate table where every value has a source note.

How we calculate eDPI and cm/360

The formulas and a worked example are above in how do you calculate eDPI. This is everything the calculator does with your numbers:

  • Inputs. Mouse DPI and in-game sensitivity, and optionally your game and a new DPI. Nothing is filled in for you.
  • eDPI = DPI x sensitivity, exactly as you typed them.
  • cm/360, once you pick a game: degrees per count = the game's turn rate x sensitivity, then cm/360 = 360 / (degrees per count x DPI) x 2.54. PUBG's slider is not linear, so it uses its own curve. The feel bands are under 20, 20 to 35, 35 to 55 and over 55 cm.
  • Same feel in other games: the sensitivity that gives the same degrees per count at your DPI, marked out of range when the game does not accept it.
  • New DPI: old DPI x old sensitivity / new DPI, shown in the game's own precision.

The data is our own turn rate table for 14 games, last checked 15 October 2026. Each value names its source: the engine or config file default where one exists (CS2, Apex, Rainbow Six Siege), otherwise community measurements. Where a value has fewer than two agreeing public sources, the game is marked approximate (7 of 14). What it does not measure: your real DPI (use the mouse DPI test), scoped and ADS multipliers, and mouse acceleration.

How accurate is this eDPI calculator?

eDPI itself is exact: it is a multiplication. The cm/360 depends on two things outside the calculator. First, your real DPI, which can differ from the advertised value by a few percent; measure it once to be sure. Second, each game's turn rate. Valorant, CS2, Apex, Overwatch 2, Call of Duty and Fortnite use widely reproduced values; games marked approximate in the list (such as Marvel Rivals) are worth checking with one real 360 turn against a ruler. Mouse acceleration, in Windows or in a game, makes any eDPI or cm/360 vary with speed, so leave it off. Scoped, zoomed and ADS sensitivities are separate settings and are not included.

Why this eDPI calculator is different

Each point below can be checked on this page.

  • Approximate values are labelled. Games whose turn rate is not firmly sourced say "approximate" in the game list and in the result, instead of showing a cm/360 that looks exact.
  • Fortnite both ways. Fortnite's percentage gives eDPI numbers 100 times larger than the decimal some lists use; the result shows both, so you compare like with like.
  • No impossible settings. In the same feel table, a sensitivity a game does not accept is marked out of range rather than printed.
  • The article uses the calculator's own data. The chart, the eDPI bands and the worked example are calculated from the same turn rate table when the page is built, not typed by hand.
  • Nothing uploaded, no account. Everything runs in your browser.
  • 15 languages. The same calculator and the same explanations in English and 14 other languages.

This eDPI calculator vs a typical eDPI calculator

This calculatorTypical eDPI calculator
eDPIYesYes
cm/360 and in/360Yes, for 14 games, turn rates sourcedOften not shown
Says eDPI only compares within one gameYes, with a chartSome do
Same feel in other games8 games side by sideUsually a separate converter
Change DPI, keep eDPIYesSome do
Check your real DPILinked mouse DPI test on the same siteRare
Starts empty, share linkYes, the link restores your numbersVaries

Sources

  • CS2 and Apex turn rate: Source engine m_yaw default 0.022, in the public CS2 convar dump.
  • Valorant, Overwatch 2, Call of Duty and Fortnite turn rates: values reproduced by independent open-source converters, listed with links in our sens converter table.
  • Rainbow Six Siege: the slider times MouseSensitivityMultiplierUnit in GameSettings.ini (default 0.02).
  • DPI and CPI: Dots per inch on Wikipedia.

Valorant, Counter-Strike 2, Overwatch 2, Apex Legends, Fortnite and the other game names are trademarks of their owners; this calculator is not endorsed by or affiliated with them.

eDPI calculator FAQ

What is eDPI?

eDPI (effective dots per inch) is your mouse DPI multiplied by your in-game sensitivity. It lets players of the same game compare how fast their aim is, even when one uses 400 DPI and another 1600. It only compares settings within one game, because every game turns by a different angle per mouse count.

How do you calculate eDPI?

Multiply your mouse DPI by your in-game sensitivity. 800 DPI at a Valorant sensitivity of 0.35 is an eDPI of 280. 400 DPI at 0.7 is also 280, so both players turn at exactly the same speed.

What is a good eDPI for Valorant?

There is no single best value. As a rough guide, a medium Valorant sensitivity of 35 to 55 cm per 360 turn is an eDPI of about 238 to 373, and many tactical shooter players sit around there or slower. Pick the speed that lets you turn 180 degrees in one arm movement and still make small corrections.

What is a good eDPI for CS2?

A medium CS2 sensitivity of 35 to 55 cm per 360 is an eDPI of about 756 to 1,188. CS2 eDPI numbers are about 3.18 times Valorant ones for the same feel, because CS2 turns 0.022 degrees per count at sensitivity 1 and Valorant 0.07.

Can I compare eDPI between games?

No. 280 eDPI in Valorant and 280 eDPI in CS2 are very different speeds. To compare games, use cm/360, which this calculator shows when you pick a game, or convert with the sens converter.

Is higher DPI better?

Not on its own. With eDPI held constant, 400, 800 and 1600 DPI give the same turn speed. Higher DPI with lower sensitivity can make very small movements smoother on some sensors, but the aim feel comes from the eDPI, not the DPI.

Does Windows mouse sensitivity change eDPI?

Not in games that read raw input, which most shooters do (Valorant, CS2, Apex, Overwatch 2). Windows pointer speed and Enhance pointer precision only affect games that use the Windows cursor. Leave Enhance pointer precision off for consistent aim.

Related tools