EN
TestYourSetup / Monitor / Monitor flicker test

Monitor flicker test

Find out why your monitor is flickering. Check frame pacing in your browser, look for panel and backlight flicker on still test screens, then pick your symptom to get the likely cause and the fix.

1. Frame stability check

Measured
Frame pacing
-

The check starts on its own in a moment. Keep this tab in front.

Refresh rate-Hz, detected
Late frames-of all frames
Biggest stall-ms, longest frame
Rate changes-during the check

Every frame's time, left to right. A flat blue line is steady. Red spikes are late frames. Dark dashed lines are the moments you marked.  

timer step - ms

    2. Flicker test screens

    Your check

    Still, full screen images. Nothing flashes. Look at each one from your normal seat for a few seconds. Arrow keys or a click step through them, Esc leaves.

    Grey levels dark greys show VRR and panel flicker

    Inversion patterns a weak panel shimmers

    Set browser zoom to 100% so the patterns line up with real pixels.

    3. PWM backlight check

    Your check
    1. Open the white screen and turn the screen brightness down to 20 to 30 percent.
    2. Camera test. Film the screen with your phone camera. Dark bands rolling through the picture mean PWM dimming. If your camera lets you set the shutter, use 1/1000 s or faster.
    3. Pencil test. Wave a pencil quickly in front of the screen. A smooth blur is fine. Several separate pencils mean the backlight flickers.
    4. Repeat at 100 percent brightness. Bands only at low brightness mean the monitor uses PWM to dim.

    Room lights can also cause bands on camera. Turn them off, or compare with a phone or TV you know is flicker-free.

    4. Find the fix

    When does your screen flicker? Pick the closest match to see the likely cause and what to do.

    No symptom picked yet.

    No permissions needed. Nothing on this page flashes, and nothing is uploaded.

    How to use this monitor flicker test

    Start with the frame check. It records every frame your browser draws for 10 seconds and shows whether frames arrive evenly, whether the refresh rate changes, and where the computer stalled. If your monitor flickers every few seconds, choose a longer check and press F each time you see it. A flicker that lines up with a late frame comes from the computer. A flicker during a perfectly steady run comes from somewhere after the graphics card.

    Then open the test screens on the monitor that flickers. The dark greys show VRR and panel flicker best, mid grey shows rolling bands, and the patterns stress the panel's pixel driving. Finish with the PWM check if your eyes get tired or the flicker is worse at low brightness.

    Why monitors flicker

    Screen flickering almost always comes from one of a short list of causes:

    • Variable refresh rate. FreeSync and G-Sync follow the game's frame rate, and many panels change brightness slightly as the rate changes. This is the most common cause of monitor flickering in games and on loading screens.
    • The link between PC and monitor. A cable or port that cannot carry the resolution and refresh rate causes flicker, sparkles or a black screen for a second.
    • Settings that dim on purpose. Content adaptive brightness, dynamic contrast, eco modes and laptop power saving change the backlight as the picture changes.
    • Software. Graphics driver bugs, HDR switching and hardware acceleration in one app.
    • Hardware. PWM dimming, which is by design, or a failing backlight or panel.

    A monitor flickering slightly on one dark grey or one inversion pattern is common on LCDs and not a fault on its own. Flicker you notice in normal use, on a PC or laptop, is worth tracking down.

    Monitor flickering by brand

    Dell, Samsung, LG, ASUS, Acer, AOC, BenQ, MSI and ViewSonic monitors flicker for the same short list of reasons, so the symptom buttons above apply to every brand. The brand mostly decides where the settings live: look in the monitor menu for dynamic contrast, eco or energy saving modes, light sensors and the Adaptive-Sync or FreeSync switch. Many budget gaming monitors, including models from Sceptre, Koorui, Gamdias, Nvision and Prism+, use VA panels with FreeSync, which show VRR flicker in dark scenes, so check that first. On an Acer, Dell or other laptop's built-in screen, start with the laptop power saving steps.

    Software flicker or hardware flicker?

    The quickest way to tell is to record the screen with software, for example with the Snipping Tool video recorder or Win + Alt + R. A screen recording captures what the graphics card sends. If the flicker shows in the recording, it is software: a driver, an app or a setting. If the recording is clean but you see flicker on the monitor, the problem is after the graphics card: the cable, the monitor settings, or the panel itself.

    Two more checks help. Open Task Manager: Microsoft's own advice is that if Task Manager flickers along with everything else, the display driver is the likely cause, and if only other windows flicker, an app is. And open the monitor's on-screen menu: the menu is drawn by the monitor, so flicker there points straight at the monitor.

    Laptop screen flickering

    On laptops, check power saving first. Intel Panel Self Refresh lets the screen keep showing the last frame while the graphics chip sleeps, and on some panels it causes flicker when the picture starts changing again. Turn it off in Intel Graphics Command Center under System, Power. AMD laptops have Vari-Bright, and Windows 11 adds Change brightness based on content under Settings, System, Display, Brightness. Test on battery and on the charger, because many of these only work on battery.

    If the flicker changes when you open or close the lid, or press on the bezel, the thin display cable that runs through the hinge is damaged. No setting fixes that; it needs a repair, which is usually cheap compared with a new screen.

    PWM flicker and eye strain

    Most screens dim either by lowering the current to the backlight (DC dimming) or by switching it on and off hundreds or thousands of times a second (pulse width modulation, PWM). At full brightness PWM is often off, but as you lower brightness the dark gaps get longer. Most people do not notice it, but some get headaches, tired eyes or nausea, especially with low frequency PWM. The phone camera and pencil tests in step 3 show it in a minute. A browser cannot measure PWM itself, because a web page has no access to the backlight, which is why that step uses your camera and eyes.

    If you are sensitive to it, keep brightness high enough that the bands disappear and reduce glare with room lighting instead. When buying, look for monitors that independent reviewers measure as flicker-free, or phones and laptops with DC dimming. Many OLED screens still use PWM, so check reviews before you buy.

    When to replace the cable or the monitor

    Replace the cable first, because it is cheap and a common cause. Buy a certified one for the speed you need, keep it short, and connect directly without adapters or docks. If the flicker stays with a new cable, a different port, a clean driver and all power saving off, and the frame check is steady, the monitor is the remaining suspect.

    Signs that the monitor itself is failing: the flicker shows in its own menu or on the no signal message, it gets worse as the monitor warms up, it comes with a buzzing sound, or the screen goes dim or dark in patches. Backlights and their power boards wear out, and the problem usually grows.

    A monitor flickering when cold that settles after a few minutes of warm-up often has an ageing power board, with parts that only work properly once warm. It tends to get worse over the months, so use the warranty while you still can.

    Return and warranty tips

    If a new monitor flickers out of the box and a new cable and the settings above change nothing, act inside the store's return window, which is usually shorter than the warranty. Film the flicker with your phone on one of the test screens here, ideally on the grey screens, and note the date, the model, the serial number on the back label and the settings you tried. Say which steps you already took (new cable, other port, driver update, VRR off), because support will ask. Many makers cover flicker under warranty for 1 to 3 years, and a clear video saves a lot of back and forth.

    More screen checks

    Check that your monitor really runs at its rated speed with the refresh rate test, look for faulty pixels with the dead pixel test, and check backlight bleed and uniformity on the black screen and white screen.

    Questions

    Why is my monitor flickering?

    The common causes are a refresh rate that does not match the monitor, variable refresh rate (FreeSync or G-Sync) reacting to uneven frame rates, a loose or low-quality HDMI or DisplayPort cable, HDR, power saving features on laptops, browser hardware acceleration, and graphics driver bugs. Less often the backlight or panel is failing. The diagnosis buttons on this page match your symptom to the likely cause.

    How do I test my monitor for flicker?

    Run the frame check on this page to see whether your computer delivers frames evenly, then open the grey and pattern test screens and look for pulsing or shimmer. For backlight flicker, set brightness to 20 to 30 percent and film the white screen with your phone, or do the pencil test.

    Why does my screen flicker only in games or on loading screens?

    That is usually variable refresh rate flicker, the most common reason a gaming monitor flickers. With FreeSync or G-Sync the monitor changes its refresh rate to follow the game, and many VA and OLED panels change brightness slightly as the rate changes. Loading screens swing between very low and very high frame rates, which makes it obvious. Capping the frame rate a few fps below the maximum usually fixes it.

    Why is my laptop screen flickering?

    On laptops the usual cause is a power saving feature: Intel Panel Self Refresh, AMD Vari-Bright, or Windows content adaptive brightness. Turn them off and test on and off the charger. If the flicker changes when you move the lid, the display cable in the hinge is likely damaged and needs a repair.

    How can I tell if my monitor uses PWM?

    Lower the brightness to about 20 to 30 percent, open the white screen and point your phone camera at it. Dark bands rolling across the image mean PWM dimming. The pencil test also works: wave a pencil in front of the white screen, and if you see several separate pencils instead of a smooth blur, the backlight is flickering.

    Can a bad HDMI or DisplayPort cable cause flickering?

    Yes. A cable that cannot carry the bandwidth for your resolution and refresh rate causes flicker, black screens for a second, or sparkles. Use a certified Ultra High Speed HDMI or DP80 or DP40 DisplayPort cable, keep it short, avoid adapters, and plug into the graphics card instead of the motherboard.

    Is screen flickering a sign the monitor is dying?

    Only sometimes. If the flicker also shows in the monitor's own on-screen menu, in the BIOS, or on the "no signal" message with nothing plugged in, the fault is inside the monitor, often the backlight or its power supply. If it only happens in Windows or in one app, it is a setting or driver problem.

    Does this flicker test flash the screen?

    No. Every test screen on this page is a still image. Nothing blinks or flashes, so it is safe to use if you are sensitive to flashing light. The only movement is the chart filling in during the frame check.

    Can a flickering screen cause headaches or eye strain?

    Some people get headaches, tired eyes or nausea from PWM flicker at low brightness, even when they cannot see it. If that sounds like you, keep brightness higher and lower it with the room light instead, or choose a monitor sold as flicker-free or with DC dimming.

    How do I fix monitor flickering?

    Work from cheap to expensive: set the native refresh rate in Windows display settings, reseat or replace the cable and try another port, turn off power saving and dynamic brightness features, then update or roll back the graphics driver. In games, cap the frame rate a few fps below the maximum, or turn VRR off to test. If it still flickers in the monitor's own menu, the issue is inside the monitor and needs a warranty repair.

    Why is my monitor flickering on and off?

    A screen that goes black for a second and comes back, randomly or suddenly, is usually losing the signal: a loose or too slow cable, a dock or adapter, or the refresh rate switching. Run the frame check with the "I saw a flicker" button. If it reports rate changes, or your marks line up with late frames, the cause is on the computer side; if not, check the cable and the monitor.

    Why is my external monitor flickering?

    With a laptop, the usual causes are the USB-C hub, docking station or adapter, a cable that cannot carry the refresh rate, and power saving that also affects the external screen. Connect directly with one certified cable, update the dock firmware (Dell and Lenovo ThinkPad docks get updates on the maker's support site), plug in the dock's own power supply, and test at 60 Hz. If 60 Hz is stable and the top rate flickers, the cable, adapter or dock is the limit.

    Why is my external monitor flickering on a Mac?

    On a MacBook Air, MacBook Pro or an M1 or later Mac, external monitor flicker most often comes from the USB-C hub or HDMI adapter. Try a direct USB-C to DisplayPort cable or a certified HDMI cable, then in System Settings, Displays, set the refresh rate to 60 Hz and turn High Dynamic Range off for that screen. If an LG or other monitor keeps turning on and off on a Mac, also try another port on the Mac and update macOS.

    Why is my second monitor flickering?

    If the second monitor flickers when gaming, G-Sync or FreeSync is often set to work in windowed mode, or the two screens run different refresh rates on one graphics card. In NVIDIA Control Panel, set G-Sync to full screen mode only and try matching both refresh rates. Also check the cable: second monitors often get the old spare one.

    How do I stop my Dell monitor from flickering?

    In the Dell on-screen menu, turn off Dynamic Contrast and any energy saving or Smart HDR mode, set the monitor's native refresh rate in Windows, and use a certified DisplayPort or HDMI cable plugged into the graphics card. On a Dell laptop, also turn off Intel Panel Self Refresh; with a Dell docking station, update the dock firmware and the laptop BIOS. Dell lists firmware and driver updates on its support site by model or service tag.

    Why is my Samsung, LG or BenQ monitor flickering?

    The causes are the same for every brand, so start with the symptom buttons on this page. Brand settings worth turning off first, because they change the backlight on purpose: Eco Saving Plus on Samsung, Smart Energy Saving on LG, and Brightness Intelligence on BenQ. On a Samsung Odyssey or another gaming model that keeps flickering after that, test with Adaptive-Sync or FreeSync off to see if VRR is the cause.

    Why is my monitor glitching and flickering with lines?

    Sparkles, lines or blocks that flicker usually mean a signal problem: the cable, the port, or a refresh rate the link cannot hold, so lower the rate one step and swap the cable. If coloured or flickering lines also show in the monitor's own menu, the panel or its internal ribbon cable is faulty and needs a warranty repair.

    Why is my OLED monitor flickering?

    OLED panels show VRR flicker more than most LCDs, mainly in dark scenes and loading screens where the frame rate jumps, so cap the frame rate or turn VRR off to test. Brightness that drops when a large bright window opens is the automatic brightness limiter, which is normal OLED behaviour, not a fault.

    Why does my monitor flicker when watching YouTube?

    If it happens only in the browser, switch Use graphics acceleration when available in Chrome or Edge settings and restart the browser. HDR videos can make a monitor switch modes with a short flicker, and on laptops Windows dynamic refresh rate can change the rate during playback, so pick a fixed rate under Advanced display. Update the graphics driver if it continues.

    Can a browser flicker test detect PWM?

    No. A web page has no access to the backlight and only sees the frames your graphics card sends, so this page cannot measure PWM or its frequency. The PWM check in step 3 uses your phone camera and the pencil test instead; for an exact number, look for reviews that measure it with a light sensor.

    More tests