What size is my monitor? Two ways to find out
The quickest answer is on the monitor itself: the model number on the sticker at the back, or in the on-screen menu, tells you the size once you look it up. Laptops usually print it on the box or the spec page. If you cannot find the model, measure the screen. Screen size is always the diagonal of the visible picture, from one corner to the opposite one, in inches, without the plastic frame.
A web page cannot simply read your screen size in inches. Browsers report pixels, and the CSS inch is defined as 96 pixels, which almost never matches a real inch on your screen. So this page does not guess: the measure tool above uses an object everyone has, and shows the result as Estimated until you have matched it, then as Measured.
How the card measurement works
Every bank card, ID card and driving licence is made to the same standard, ISO/IEC 7810 ID-1: 85.60 x 53.98 mm. When the card drawn on screen is exactly as wide as your real card, the page knows how many CSS pixels make one millimetre on your screen. It then divides your screen size in CSS pixels, which the browser does report, by that scale. The result is the real width, height and diagonal. The page also gives the pixel density from your physical pixels and the measured diagonal.
Lining up by eye is accurate to about 1 mm on each edge, so the card result is within roughly 1 to 2 percent, about 0.3 inch on a 24 inch monitor. The Ruler tab draws a longer scale, up to 30 cm, and the longer the distance you match, the smaller the error. Your match is saved in this browser for this screen, so the result is still there next time.
Tips for an accurate match
- Reset zoom first. Browser zoom changes the size of everything on the page. Press Ctrl and 0 (Cmd and 0 on a Mac). The page warns you when zoom looks like it is on.
- Look straight at the edge. Viewing from an angle shifts the edge you are matching. Keep your eye in front of it.
- Hold the card flat and gently. Press lightly: LCD and OLED panels do not like pressure.
- Several monitors? Drag the browser window to the screen you want to measure and match the card there. Each screen has its own scale.
- Phones and tablets: the card is shown upright on narrow screens so it fits. Match the long edge from top to bottom.
How the screen size calculator works
Enter a resolution and a diagonal and the calculator gives the width and height of the visible screen, the pixel density, the dot pitch and the aspect ratio. The width is the diagonal x width in pixels / diagonal in pixels, where the diagonal in pixels is the square root of width squared plus height squared. PPI is the diagonal in pixels divided by the diagonal in inches, and dot pitch is 25.4 mm divided by the PPI.
For example, a 27 inch monitor at 2560 x 1440 is 23.5 x 13.2 inches (59.8 x 33.6 cm), with 109 PPI and a dot pitch of 0.233 mm. The resolution is prefilled with your screen's physical pixels, so on most computers you only need to add the diagonal.
Pixel density and viewing distance
The same resolution looks sharper on a smaller screen. A 24 inch 1080p monitor has about 92 PPI, a 27 inch 1440p about 109, a 34 inch 3440 x 1440 ultrawide about 110, a 32 inch 4K about 138, a 15.6 inch 1080p laptop about 141 and a 27 inch 4K about 163. The Pixels blend at value shows how far away a person with 20/20 vision stops seeing single pixels (one pixel per arc minute): about 95 cm for 92 PPI, 80 cm for 109 PPI and 54 cm for 163 PPI. If you sit closer than that, text looks a little soft, and a higher PPI or more Windows scaling helps. For pixels per degree at your own viewing distance and a chart of common screens, use the PPI calculator.
Aspect ratio calculator
The aspect ratio is the width and height reduced to the smallest whole numbers. 1920 x 1080 and 3840 x 2160 are both 16:9, and 1920 x 1200 and 2560 x 1600 are 16:10. Some resolutions are only close: 1366 x 768 reduces to 683:384, so the calculator shows about 16:9. Ultrawide monitors are sold as 21:9, but 2560 x 1080 is really 64:27 and 3440 x 1440 is 43:18. The ratio matters when you compare sizes: a 34 inch 21:9 ultrawide is about as tall as a 27 inch 16:9 monitor, just much wider.
Screen size, resolution and refresh rate
Size, resolution and refresh rate are three separate numbers. To see your resolution, pixel ratio and Windows scaling, open what is my screen resolution. To check the Hz, run the refresh rate test, and on a new monitor, look for stuck pixels with the dead pixel test.
Questions
What size is my monitor?
Check the model number on the sticker at the back or in the monitor menu and look it up, or measure it here: hold a bank card against the screen, resize the card on this page until it matches, and the page works out the diagonal in inches and centimetres. A browser cannot read the physical size on its own.
How do I measure my monitor size?
Measure the visible picture area diagonally, from one corner to the opposite corner, without the frame. A tape measure works, or use the bank card method on this page, which needs nothing but a card and gives the diagonal, width and height.
Is screen size measured diagonally?
Yes. Monitors, laptops, TVs and phones are sold by the diagonal of the visible screen in inches. Two screens with the same diagonal can have very different width and height if their aspect ratios differ, which the calculator shows.
Can a website detect my screen size in inches?
No. Browsers report the resolution in pixels, not the physical size, and the CSS inch is a fixed 96 pixels that rarely matches a real inch. That is why this page asks you to match a real card or ruler, and labels the result Estimated until you do.
How accurate is the bank card method?
Bank cards are made to ISO/IEC 7810 ID-1, 85.60 x 53.98 mm. If you line up the edges to within about 1 mm, the result is within about 1 to 2 percent, roughly 0.3 inch on a 24 inch monitor. A 20 or 30 cm ruler is more accurate still.
What is PPI on a monitor?
PPI (pixels per inch) is pixel density: the diagonal in pixels divided by the diagonal in inches. A 24 inch 1080p monitor has about 92 PPI, a 27 inch 1440p about 109 and a 27 inch 4K about 163. Higher PPI looks sharper at the same distance.
What is dot pitch?
Dot pitch, or pixel pitch, is the distance from the centre of one pixel to the next, in millimetres. It is 25.4 divided by the PPI, so a 27 inch 1440p monitor has a pitch of about 0.233 mm. Smaller is sharper.
How do I calculate aspect ratio?
Divide the width and height in pixels by their greatest common divisor. 1920 x 1080 reduces to 16:9 and 2560 x 1600 to 16:10. Ultrawide monitors such as 3440 x 1440 reduce to 43:18, which is sold as 21:9. The calculator does this for any resolution.
Why does my 24 inch monitor measure 23.8 inches?
Many monitors are sold under a rounded class size. A 24 inch class monitor often has a 23.8 inch visible area, and a 27 inch is sometimes 27 or 26.9 inches. The measured result names the closest common size so you can match it to the box.
More tests
Black screenA full black screen, one click
White screenA full white screen, one click
Refresh rate testYour monitor Hz, measured in the browser
What is my screen resolutionScreen resolution, browser window size and pixel ratio
PPI calculatorPixels per inch, pixel pitch and retina distance for any screen