How to run a backlight bleed test
- Dim the room. Turn off the main light and close the curtains. A small lamp behind you is fine. Bleed is hard to see in daylight, and a fully dark room makes any LCD look worse than in real use, so use the light you watch films or play games in.
- Set brightness to your normal level. Not 100% unless you use it that way. Bleed grows with brightness, so testing at maximum shows more than you will ever see.
- Let the screen warm up for 10 to 15 minutes, and wipe it with a dry cloth so smudges do not catch the light.
- Open full screen and sit where you normally sit. Give your eyes about 20 seconds; the hint fades out on its own. Look at the four corners and the edges.
- Move your head. Lean left and right, then stand up and look down at the screen. Glow that changes or moves is IPS glow. Patches that stay fixed are backlight bleed.
- Try the darker modes. Very dark grey and the dark gradient show clouding and uneven patches that pure black can hide.
- Mark what you find with a long-press or right-click, set the type for each spot, then download the spot map.
Last, play a dark film scene with black bars or a dark game at your usual settings. If you do not notice the patches there, the panel is fine for real use, whatever the black screen shows.
Backlight bleed, IPS glow or clouding?
An LCD has a backlight behind the panel, and the panel can never block it completely. Where that light escapes decides what you see. Backlight bleed is light leaking around the edges, usually where the frame presses on the panel or leaves a gap. It shows as fixed patches along the edges, often yellowish, and it does not change when you move. IPS glow comes from how IPS panels pass light at an angle. It appears in the corners when you sit close, changes strength and colour as you move your head, and almost disappears from further back. That is why an IPS glow test always includes looking from an angle. Clouding, or mura, is uneven brightness across the whole picture, most common on VA panels and large TVs, and it shows best on very dark grey rather than full black.
OLED screens have no backlight, so they have no bleed or glow. Mini LED screens can show blooming instead: a halo around bright objects on black, which this black screen does not trigger.
How to judge if it is normal
Almost every LCD shows some light on a full black screen in a dark room. Use these rules of thumb:
- Normal: you only see it on this test, in a dark room, and it is faint and even. IPS glow that fades when you sit back is also normal for that panel type.
- Borderline: a clear patch in one or two corners that you notice in dark film scenes, but only at night. Decide while you can still return it.
- Return it: bright patches that reach well into the picture, bleed you can see with a light on, strong patches in the middle of the screen, or bleed that gets worse over weeks.
Bleed varies from unit to unit of the same model. An exchange often gets a better panel, but not always, and a second exchange is rarely granted, so decide how much you can live with first.
Phone photos exaggerate backlight bleed
Phone cameras brighten dark scenes. On a black screen they raise the exposure far beyond what your eyes see, so faint glow turns into bright yellow blotches. Before you photograph it, turn off night mode, tap the screen in the camera app and slide the exposure down until the photo looks like what you see. Shoot straight on from your seating distance, not close up or from the side, which adds IPS glow. Support teams and shops know about this effect, so an honest photo plus your spot map is more convincing than a dramatic one.
Return, exchange or warranty
Test a new monitor or laptop on the day it arrives. The shop return window, often 14 to 30 days, is the easiest route, because you do not need to prove a fault. A warranty claim is harder: many makers say some bleed and IPS glow are normal for the panel type and only accept strong bleed. Send the spot map, an honest photo, the model and serial number and the brightness you tested at. Do not press on the panel, loosen screws or "massage" the frame, which can make things worse and void the warranty.
Making bleed less visible
Lower brightness a little; bleed drops faster than the picture does. Add a little light in the room, or a bias light behind the screen, so your eyes are not fully dark adapted. In games and films, keep black bars at true black by matching the RGB range in your graphics driver and monitor. And sit at your normal distance, since IPS glow fades with distance.
More screen checks
Check for faulty pixels with the dead pixel test, set gamma and black level with the monitor calibration patterns, and use the plain black screen or white screen for a quick uniformity look.
Questions
How do I test my monitor for backlight bleed?
Dim the room, set brightness to the level you normally use, open the black screen on this page in full screen and wait about 20 seconds. Look at the edges and corners from your normal seat. Light patches that stay in the same place are backlight bleed. Then move your head to the side: a glow that changes or moves is IPS glow.
What is the difference between IPS glow and backlight bleed?
IPS glow is a property of IPS panels: a silvery or warm glow in the corners that changes strength and colour as you move your head, and fades when you sit further back. Backlight bleed is light leaking past the edge of the panel. It looks like fixed yellow or white patches at the edges that stay put whatever angle you look from.
How much backlight bleed is normal?
A faint glow on a full black screen, in a dark room, at high brightness, is normal on almost every LCD. It becomes a fault when you notice it in normal use: in dark film scenes or games at your usual brightness, with some room light on. Bright patches that reach far into the picture, or that you see in a lit room, are worth a return.
Can backlight bleed be fixed?
Not at home. Bleed comes from pressure on the panel or a gap in its frame. Some people report a little improvement after the first weeks of use, but it is not reliable. Do not press, twist or loosen the frame, because it can make it worse, crack the panel and void the warranty. Lower brightness and a little light behind the screen make it less visible.
Is backlight bleed covered by warranty?
Usually only when it is severe. Many makers treat some bleed and IPS glow as normal for the panel type, so a warranty claim for mild bleed often gets refused. A return or exchange within the shop return window is much easier, so test a new monitor on the day it arrives.
Why does backlight bleed look worse in photos?
Phone cameras brighten dark scenes automatically. On a black screen they push the exposure up until the faint glow looks like bright patches. Lower the exposure until the photo matches what you see, and photograph from your seating distance, straight on. Otherwise your photo shows bleed that is not visible in real use.
Do OLED screens have backlight bleed?
No. OLED pixels make their own light and have no backlight, so a black screen is truly black. If an OLED shows a glow on this test, the black is not really black: check that the PC and the TV or monitor use the same RGB range (full or limited).
What is VA clouding?
Clouding, also called mura, is uneven, blotchy brightness across a dark screen, most common on VA panels and large TVs. It shows best on the dark grey and dark gradient modes on this page. Mild clouding is common; strong patches you notice in dark scenes are a reason to exchange.
Does backlight bleed get worse over time?
It usually stays about the same, and sometimes eases a little as the panel frame settles. If it clearly grows over weeks or months, or a new bright patch appears, the panel is under pressure or damaged, which is worth a warranty claim while you still have one.
More tests
Black screenA full black screen, one click
White screenA full white screen, one click
Refresh rate testYour monitor Hz, measured in the browser
What is my screen resolutionScreen resolution, browser window size and pixel ratio
Monitor size calculatorScreen size in inches, PPI and aspect ratio