EN
TestYourSetup / Aim and sensitivity / CS2 to Valorant sens

CS2 to Valorant sens

Your Valorant sensitivity is your CS2 sensitivity divided by 3.18 at the same DPI. Type yours below for the exact value, with cm/360 and eDPI.

From
To
Your Valorant sensitivity Calculated0.3771Valorant = CS2 x 0.3143
cm/36043.3same in both games
in/36017.0inches per full turn
eDPI before960CS2, DPI x sens
eDPI after302Valorant, DPI x sens

Train at this sens

Counter-Strike 2

Horizontal FOV is fixed at about 106 degrees at 16:9 (90 at 4:3). Scoped weapons use zoom_sensitivity_ratio, which is not converted here.

Turn rate: 0.022 degrees per count at 1. Source: Source engine convar m_yaw, default 0.022 degrees per count, multiplied by the sensitivity convar (listed in the public CS2 convar dump).

Valorant

Horizontal FOV is fixed at 103 degrees. Scoped sensitivity multiplier is a separate setting and is not converted here.

Turn rate: 0.07 degrees per count at 1. Source: 0.07 degrees per count is the widely reproduced 360 measurement; it gives the well-known ratio CS2 = Valorant x 3.18 (0.07 / 0.022).

Hip fire at the same cm/360 (360 degree distance). Scoped and ADS sensitivity are separate settings in most games and are not converted here.

No permissions needed. Everything runs in your browser and nothing is uploaded.

Divide by 3.18

CS2 turns 0.022 degrees per mouse count at sensitivity 1 and Valorant turns 0.07, so Valorant is 3.18 times faster at the same number. To keep the same arm movement for a full turn, Valorant sens = CS2 sens / 3.18 (or x 0.3143). A CS2 sensitivity of 1.2 at 800 DPI is 43.3 cm per 360, and so is Valorant 0.377.

eDPI follows the same rule. A CS2 eDPI of 960 is a Valorant eDPI of about 302, which is why Valorant pro settings lists look so much lower than CS2 ones even though the turn speeds are similar.

Common CS2 sens values in Valorant

CS2 sensValorant senscm/360 at 400 DPIcm/360 at 800 DPIcm/360 at 1600 DPI
0.80.2514129.964.932.5
10.3143103.952.026.0
1.10.345794.547.223.6
1.20.377186.643.321.6
1.50.471469.334.617.3
1.80.565757.728.914.4
20.628652.026.013.0
2.50.785741.620.810.4
30.942934.617.38.7

Same DPI in both games. Calculated from the turn rates in the sens converter table.

What changes when you move from CS2 to Valorant

  • Stretched players: if you played CS2 at 4:3 stretched, Valorant at native 16:9 shows the same turn as narrower, slower-looking motion on screen. Many players feel too slow at first. Keep the converted value for a week before raising it.
  • Crosshair: Valorant crosshairs are built differently (inner and outer lines, error spread). Rebuild a static one in the Valorant crosshair generator to keep the familiar look.
  • Raw input: both games use raw input, so Windows mouse settings do not matter. Your DPI does, so measure it with the DPI test if you changed mice.

The aim trainer can turn at your new Valorant sens, so you can practise the movement before you queue. Going back to CS2 later? Use Valorant to CS2.

Questions

How do I convert CS2 sens to Valorant?

Divide your CS2 sensitivity by 3.18, or multiply it by 0.3143, at the same DPI. CS2 1.2 becomes about 0.377 in Valorant.

Can I use my CS:GO sensitivity too?

Yes. CS:GO and CS2 use the same turn rate (m_yaw 0.022), so a CS:GO sensitivity converts to Valorant exactly the same way. Only m_yaw changes it, if you edited it for a stretched resolution.

Valorant only shows three decimals. Does rounding matter?

Not in practice. One step of 0.001 in Valorant is about 0.3 percent of a typical 0.35 sensitivity, far below what anyone can feel. Round to the nearest 0.001.

Why does Valorant feel slower or faster after converting?

Your 360 distance is the same. What changes is the picture: Valorant's field of view is fixed at 103 degrees, close to CS2 at 16:9 but very different from 4:3 stretched, where CS2 targets look wider and move faster on screen. Valorant's movement is also more forgiving of moving while shooting, so you make fewer mid-fight corrections.

What about my CS2 zoom sensitivity?

Hip fire only. CS2 zoom_sensitivity_ratio and Valorant scoped sensitivity are separate multipliers. A ratio of 1 in CS2 and 1 in Valorant do not feel identical because the scopes zoom by different amounts, so tune scoped sensitivity in the Range.

What is a typical Valorant sensitivity?

Many Valorant players use an eDPI (DPI x sens) of roughly 200 to 400, which is about 0.25 to 0.5 at 800 DPI. Converted from CS2, most players land in that range. It is a rough guide, not a rule.

More tests