EN
TestYourSetup / Aim and sensitivity / Valorant to CS2 sens

Valorant to CS2 sens

Your CS2 sensitivity is your Valorant sensitivity times 3.1818 at the same DPI. Type yours below to get the exact number, your cm/360 and eDPI in both games.

From
To
Your Counter-Strike 2 sensitivity Calculated1.1136CS2 = Valorant x 3.182
cm/36046.7same in both games
in/36018.4inches per full turn
eDPI before280Valorant, DPI x sens
eDPI after891CS2, DPI x sens

Train at this sens

Valorant

Horizontal FOV is fixed at 103 degrees. Scoped sensitivity multiplier is a separate setting and is not converted here.

Turn rate: 0.07 degrees per count at 1. Source: 0.07 degrees per count is the widely reproduced 360 measurement; it gives the well-known ratio CS2 = Valorant x 3.18 (0.07 / 0.022).

Counter-Strike 2

Horizontal FOV is fixed at about 106 degrees at 16:9 (90 at 4:3). Scoped weapons use zoom_sensitivity_ratio, which is not converted here.

Turn rate: 0.022 degrees per count at 1. Source: Source engine convar m_yaw, default 0.022 degrees per count, multiplied by the sensitivity convar (listed in the public CS2 convar dump).

Hip fire at the same cm/360 (360 degree distance). Scoped and ADS sensitivity are separate settings in most games and are not converted here.

No permissions needed. Everything runs in your browser and nothing is uploaded.

The Valorant to CS2 multiplier

Both games turn your view by a fixed angle per mouse count. In Valorant it is 0.07 degrees at sensitivity 1; in CS2 it is the Source engine's m_yaw of 0.022 degrees. So one unit of Valorant sensitivity equals 3.1818 units in CS2, and the rule is simple: CS2 sens = Valorant sens x 3.1818. A common Valorant setting of 0.35 at 800 DPI turns into about 1.114 in CS2, which is a 360 distance of 46.7 cm in both games.

Valorant shows sensitivity to three decimals and CS2 accepts as many as you type in the console (sensitivity 1.114), so you can match it exactly.

Common Valorant sens values in CS2

Valorant sensCS2 senscm/360 at 400 DPIcm/360 at 800 DPIcm/360 at 1600 DPI
0.20.6364163.381.640.8
0.250.7955130.665.332.7
0.30.9545108.954.427.2
0.351.113693.346.723.3
0.41.272781.640.820.4
0.451.431872.636.318.1
0.51.590965.332.716.3
0.61.909154.427.213.6
0.82.545540.820.410.2

Same DPI in both games. Calculated from the turn rates in the sens converter table.

Why it can still feel different

  • Field of view. Valorant locks the horizontal FOV at 103 degrees. CS2 shows about 106 degrees at 16:9. On 4:3 stretched it shows 90 degrees spread across the whole screen, so targets look wider and sideways motion looks faster. Same cm/360, different picture.
  • Movement and spray. CS2 counter-strafing, recoil and the tagging when you get hit change how much you move the mouse mid-fight, so small corrections feel different even at the same turn speed.
  • Crosshair. A different crosshair changes how fine your aim looks. You can rebuild your Valorant crosshair in the CS2 crosshair generator.

The fix is time, not a new number. Play a few sessions at the converted value before you adjust, then change it by 5 to 10 percent at most. Warming up in the aim trainer with CS2 selected uses the same hand movement.

Going the other way

Switching back? Use the CS2 to Valorant converter, which divides by the same 3.1818. For any other game, the main sens converter has every pair.

Questions

How do I convert Valorant sens to CS2?

Multiply your Valorant sensitivity by 3.1818 at the same DPI. Valorant 0.35 becomes about 1.114 in CS2. The converter above does it for any DPI and shows the cm/360.

Why is the multiplier 3.18?

Valorant turns 0.07 degrees per mouse count at sensitivity 1 and CS2 turns 0.022 degrees. 0.07 divided by 0.022 is 3.18, so you need a CS2 number 3.18 times bigger to turn the same amount.

My converted CS2 sens feels faster. Is it wrong?

Probably not. CS2 at 16:9 shows about 106 degrees across the screen and Valorant shows 103, so the world slides past slightly differently, and CS2 models and maps are scaled differently. Your 360 distance is identical. Give it a few matches before changing it.

Should I use the same DPI in both games?

Yes, unless you have a reason not to. Keeping the DPI the same means the only thing that changes is the in-game number. If you change DPI too, enter it in New DPI and the converter adjusts the CS2 value.

What about my scoped sensitivity?

This converts hip fire only. CS2 scoped sensitivity is zoom_sensitivity_ratio, a multiplier on top of your sens; 1.0 is the default. Valorant scoped sensitivity is a separate multiplier as well, so set it in CS2 after you have matched hip fire.

Does CS2 have raw input like Valorant?

CS2 reads raw mouse input by default, so Windows pointer speed and Enhance pointer precision do not affect it, the same as Valorant. If you set m_yaw or use a stretched resolution, put your m_yaw in the converter.

More tests